Adding Brother printer with Mango to tablet for RapidLot

Brother � How to add a Mango connected printer to the tablet ----------------------------------------------------------------------------------------- Cables: 1. Micro USBC from Tablet to USB standard into Mango 2. Mango to power plug 3. Ethernet from MANGO to Printer 1. Go to settings>connections>Mobile Hotspot and Tethering and turn it on. Also turn on USB Tethering. 2. Under settings>connections>Mobile Hotspot and Tethering, click "USB TETHERING" 3. Now, go to your printer... you must search for the Router SSID, which is borrowing your Tablet's wifi. Typically something like this: settings> WLAN. There are lots of ways to connect from here, but if there is a SETUP WIZARD it will automatically recognize nearby signals. SOMETIMES YOU MUST ENABLE WLAN FOR THIS TO WORK. 4. On the printer screen, You will see both the tablet as well as the router. The Mango Router will benin with GL-MT300N and have a bunch of numbers after it. You can now connect to the router. 5.From here you can connect to the mango, but will have to input the password on your printer. This and other information is located on the bottom of the Mango Router. Printer will let you know if you're connected. Print from Tablet Now, lets make sure your Tablet knows what to print to. 1. Go into the respective app for your printer, in this case a brother HL-L6400DW. You can at this time locate the printer by searching for devices connected via WIFI, or by manually putting the IP address of the printer. The Brother Plugin can fail and we can probably come up with workarounds for those, as long as you have successfully connected your Mango/tablet/printer to each other. Performing these steps allowed reps to connect via the Mango and print from Rapid Lot. It is much simpler to connect to the printer via a secure, non-wireless ethernet or even USB connection. as it stands, with the HL-L6400DW, Reps have printed the following ways: 1.Wirelessly via Wifi Direct 2. Wirelessly via the Mango 3. Wired via Dongle+Ethernet 4. Wired via Dongle+USB